Sanwa 1000A Clamp Meter CATIV 600V
The Sanwa 1000A Clamp Meter is designed for measurements of low-voltage circuits in the application range of 1000V CAT III and 600V CAT IV. It is suited to current and voltage measurement of power lines, electrical equipment, and electrical facilities less than 1000Vrms to ground.
Features
The CT shape makes it easier to clamp cable in crowded switchboards.
True RMS reading for measurement of even distorted waveforms.
An electric field (EF) function is incorporated in the tip of the CT to
enable detection of about AC 90V or more.
Clamp opening diameter of 34 mm at maximum.
Specifications
ACA 60.00/600.0/1000A Accuracy ±(2.5%+5) Resolution 0.01A
ACV 6.000/60.00/600.0/1000V Accuracy ±(1.2%+3) Resolution 0.001V
DCV 6.000/60.00/600.0/1000V Accuracy ±(1%+3) Resolution 0.001V
Resistance 6.000k/60.00k/600.0k/6.000M/60.00MΩ Accuracy ±(2%+5) Resolution 0.001kΩ
Frequency ACV 10Hz-10kHz, ACA 10Hz-2kHz ±(1%+5) 0.1Hz
Capacitance 60.00n/600.0n/6.000µ/60.00µ/600.0µ/6.000m/60.00mF Accuracy ±(4%+3) Resolution 0.01nF
Continuity Buzzer sounds below 30Ω Open voltage: approx. 1V or less
EF sensing when a voltage or electric field of about 90 V or more is detected (50/60Hz)
Sampling rate Approx. 3 times/sec.
Bandwidth ACA 45-400Hz ACV 45Hz-1kHz
Display 6000/9999 (Hz function)
Clamp diameter/Conductor size Φ34mm/10×64mm
Battery LR03×3
Battery life A function: Approx. 200 hrs. hrs.
Size/Mass H252×W85×D40mm/Approx. 360g
Safety standards IEC61010 CAT Ⅳ 600V/CAT Ⅲ 1000V
