Sanwa 2000A Clamp Meter
This instrument is an AC/DC clamp meter/digital multimeter of the RMS value response type, designed for measurements in the range specified by IEC61010-1 CAT.IV 1000V. It is suitable for current and voltage measurements of low-voltage circuitry, electric equipment and power supply facilities.
Features
AC/DC current measurable max. 2000A & DMM function
True RMS
Dual display shows voltage/current and its frequency
EF(Electric Field) sensing
VFD(Variable Frequency Drive) frequency measurement effects of ghost voltage
Data hold / Range hold / Peak hold(5ms)
Relative value
Auto power save(34min after the last operation)(cancellable)
Specifications
ACA 200.0/2000A Accuracy ±(2.0%+5) Resolution 0.1A
DCA 200.0/2000A Accuracy ±(2.0%+5) Resolution 0.1A
ACV 6.000/60.00/600.0/1000V Accuracy ±(1.2%+5) Resolution 0.001V
DCV 6.000/60.00/600.0/1000V Accuracy ±(0.5%+5) Resolution 0.001V
Resistance 600.0/6.000k/60.00k/600.0k/6.000M/40.00MΩ Accuracy ±(0.5%+5) Resolution 0.1Ω
Frequency 10～1999Hz Accuracy ±(0.1%+4) Resolution 0.01Hz
Capacitance 60n/600n/6μ/60μ/600μ/2000μF Accuracy ±(2.0%+5) Resolution 0.01nF
Continuity Buzzer sounds at below 10-200Ω Open voltage: approx. 0.5V
Diode test Open voltage: approx. 1.8V
EF sensing A voltage or electric field of about 60 V or more is detected. The bar graph and intermittent buzzer beeps change in three steps according to the field intensity. (50/60Hz)
Sampling rate Approx. 5 times/sec.
Bandwidth 50～400Hz
Display 6000/1999（Hz)
Max. overload protection input DC/AC1100V
CT: DC/AC2000A
Clamp diameter/Conductor size Φ55mm/20x66mm
Battery R6Px2
Battery life A function: Approx. 80 hrs. Functions other than A: Approx. 240 hrs. (Zinc-carbon battery/Backlight off)
Size/Mass H264×W97×D43mm/Approx. 640g
Safety standards IEC61010 CAT.Ⅳ1000V
