Sanwa Voltage Detector Supporter

The Sanwa Voltage Detector Supporter is a device to prevent erroneous cutting of live wires due to misjudgement. Before cutting, you can see if the wiring is live. It is designed to be attached to electricians pliers. When the cable is live the product notifies you with a alarm and LED indication. The product is not to be used in place of a voltage detector or multimeter in testing for dead.

Product Specification

Detectable voltage level: Approx. AC 60V to 600V 50Hz/60Hz
Indication method Intermittent sound/LED lighting and blinking
Applicable wire: Covered wire ( unshielded wire )
Battery: LR44 X 2Pcs
Size/Mass: 23(H) x 77(W) x 13(D)mm Approx. 13g
Standard accessories included: Rubber rings M, S Sensitivity adjustment volume cover, LR44 ( Button cell ) x 2 , Instruction manual.

Caution

This product is not a voltage detector and a cutting tool with this product attached is also not a voltage detector. Never use this instrument for voltage detection. Use a commercially available voltage detector. Do not apply a strong shock to the product body, as it may break. Never touch the metal part of the cutting tool on which the product is mounted to the charging part. Be sure to check the operation of this product with a known voltage source before use. Since the product works with capacitive coupling, it may not be detectable depending on the condition of attaching, gripping, or surrounding environment. As this product works for the commercial power supply frequency 50/60 HZ only, a voltage such as the secondary side of an inverter can not be detected.