Products

Product Categories

Non Contact Voltage Detector

The SEW Non Contact Voltage Detector is intended to check for the presence of AC Voltage, signalling the user with an intermittent tone and a flashing LED. They are used to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wire.

Description

SEW Non Contact Voltage Detector 

The SEW Non Contact Voltage Detector is intended to check for the presence of AC Voltage, signalling the user with an intermittent tone and a flashing LED. They are used to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wire.

Furthermore The PU240 Proving Unit provides a safe and reliable means of checking the correct functioning of Multi meters and two pole Voltage Indicators (VIs) before and after use as advised in the Safe Working Practice For electricians. Additionally they have the capability of checking the Operation of Non-Contact voltage detectors.

 

Features 

Bright LED and audible alarm sound when voltage is present.
Designed for non-contact voltage detection.
Can be used to find a break in a wire.
Flashlight function.
ON/OFF switch for longer battery life.
Microprocessor-controlled smart voltage detector.
Bright LED and audible alarm sound when voltage is present.
Designed for non-contact voltage detection.
LED indication for battery condition.
Identify Hot and Neutral.

 

Technical Data

Voltage detection 50V~1000V.
Frequency 50~500 Hz.
Measurement category CAT III 600V.
Indication LED and Tone.
Operating conditions Temperature : 0~40°C.
Humidity : Less than 80% R.H.
Altitude : 2000m maximum.
Pollution degree 2.
Dimensions 142(L) × 28(W) × 27(D)mm.
Weight (battery included) Approx. 45g.
Power source 1.5V (AAA) × 2.
Safety standard EN 61010-1 CAT III 600V EN 61326-1.