SEW Tone Cable tracer ( Amplifier & Tone Generator ) 

The SEW Tone Cable Tracer is commonly referred to as F Sets. They are one of the simplest ways to trace unpowered cables using a Amplifier probe and also tone generator.

Product Features 

Amplifier Probe (181CB-A)
The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation.
Works with any Tone Generator to identify wires.
Volume control for increased sensitivity and adjustable to suit work environment.
Recessed ON/OFF button prevents battery drain.
A phone jack is designed for headset or handset.

Tone Generator (181CB-G)
Tone Generator is a great tool for locating and identifying cable pairs or individual conductors.
181CB-G does not only serve as a tone generator, but also serves as a continuity and polarity tester.
A tone selector switch located inside the unit for selection of the fast tone or the slow tone.
The continuity function is only applied to Line 1.
Two bi-colored LED’s for Line 1 and Line 2 indication of the polarities of the telephone lines.
The unit has alligator type terminals, a modular cable of 4 conductors with a strong connector.
RJ11 and RJ45 Connections

Specifications 

Amplifier Probe

Frequency 1Hz~12kHz.
Receiver distance < 50cm.
Sensitivity control √
Probe tip Fixed.
Power source 9V(6F22) × 1.
Dimensions 230(L) × 56(W) × 27(D)mm.
Weight Approx. 125g (battery included).

Tone Generator 

Wave form Square Wave.
Frequency 1kHz±15%.
Over voltage protection 80V DC.
Alternating tone Fast Fast and Slow.
Connection RJ11 connector, alligator clip x 2, RJ45 connector.
Power source 9V(6F22) × 1.
Dimensions 64(L)×58(W)×34(D)mm 86(L)×63(W)×26(D)mm.
Weight (battery included) Approx. 130g.

General

Operating temp. & humidity 0˚~40˚C, 80% Max.
Storage temp. & humidity -10˚~50˚C, 80% Max.
Safety standard EN 61326-1 EN 55011 EN 61000-4-2 EN 61000-4-3.
Accessories Instruction manual, Soft pouch, Batteries.