Unit 1/11 Eileen Street, 4119 Underwood, QLD

    (07) 3209 4333
    0 Enquiry Cart
    X
    • No products in the list
     

    Arc Flash Face shields

    Home > Arc Flash Face shields

    Product Categories

    Arc flash face shields provide protection that is critically important in keeping workers safe. There are many methods of protecting personnel from arc flash hazards. This can include personnel wearing arc flash personal protective equipment (PPE) such as arc flash face shields. The best way to remove the hazards of an arc flash is to de-energize electrical equipment when interacting with it, however de-energizing electrical equipment is in and of itself an arc flash hazard. EFO Also supplies a full range of Arc Flash Clothing. Please contact the expert team at EFO for any assistance in selection of Arc Flash protective clothing and Electrical PPE.

    Complete Catalog (PDF) Category Catalog (PDF)

    Showing the single result

    Arc Flash Protection

    Arc Flash Face Shields

    Arc flash face shields provide critical protection for workers. They
    protect the face, eyes, neck and ears from arc flash heat, flying
    molten metal and UV/IR radiation in the event of an arc flash incident.

    The best way to remove the hazards of an arc flash is to de-energise
    electrical equipment before interacting with it. However, de-energising
    electrical equipment can itself present an arc flash hazard.

    Arc flash face shields should always be worn together with the correct
    rating of arc-rated clothing. Please contact the EFO expert team for
    assistance selecting arc flash protective clothing and electrical PPE.

    Electrical Factory Outlet stocks Category 2 arc flash kits rated to
    8 cal/cm², which is the minimum for most general electrical work, and
    Category 4 kits rated to 40 cal/cm² or higher for high-risk switchboard
    work. Our new X50 range of 52 cal/cm² kits uses a lightweight fabric
    system.


    Arc-Rated Protection


    Face, eye, neck and ear protection for electrical arc hazards


    Multiple Protection Levels


    Category 2, Category 4 and lightweight X50 solutions


    Australia-Wide


    Locally stocked arc flash equipment and reliable delivery

    Why Choose Us

    Electrical Factory Outlet: Your Partner in Electrical Safety

    At Electrical Factory Outlet, we understand the risks involved in
    electrical work and the importance of using trusted protective gear.

    With decades of experience supporting electricians across Australia,
    we supply tested and reliable arc flash face shields that perform in
    real-world conditions.

    Our solutions are designed to meet strict safety standards while
    remaining practical for daily use.

    With locally stocked products and fast delivery, we help
    professionals access the right arc flash face shield solutions when
    they need them most.

    • Decades of experience supporting Australian electricians
    • Tested arc flash protection for real-world working conditions
    • Arc flash helmet and visor systems for high-risk work
    • Category 2 and Category 4 arc protection options
    • Lightweight X50 arc flash clothing and hood systems
    • Products designed to meet strict safety requirements
    • Locally stocked products for faster access
    • Expert support when selecting electrical PPE

    ✓
    Arc Flash Protection

    Reliable Arc-Rated Face Shield Solutions for Electrical Safety

    Arc flash incidents can occur suddenly and release intense heat and
    energy, making proper protection critical.

    Using certified arc flash face shields helps reduce the risk of serious
    injury by shielding the face from thermal exposure and flying debris.

    These protective solutions are essential for electricians working on
    switchboards, control panels and high-voltage systems.

    A complete arc flash helmet and visor setup provides full head and face
    protection, making it suitable for high-risk tasks.

    Arc-rated balaclavas can also be worn beneath the face shield for
    greater protection.

    ✓
    X50 Arc Flash Protection

    ArcSafe® X50 Arc Flash Switching Hood

    The ArcSafe® X50 Arc Flash Switching Hood incorporates the new highly
    transparent ArcSafe face shield.

    The hood provides the user with full colour recognition while helping
    protect the face and head during high-risk switching work.

    Lightweight Fabric System

    The new fabric system is ideal for hot conditions and wicks moisture
    away from the body, helping improve wearer comfort.

    PPE Compliance

    X50 garments comply with the Personal Protective Equipment
    requirements of AS 4836:2011, Safe Working on or Near Low-Voltage
    Electrical Installations and Equipment.

    They also comply with ENA NENS 09-2014, National Guideline for the
    Selection, Use and Maintenance of PPE for Electrical Arc Hazards –
    Arc-Rated Garments and Hoods.

    Explore More

    Explore Our Electrical Equipment Range

    Whether it is diagnosing faults, ensuring compliance or maintaining
    safety on-site, our categories are built to deliver practical, reliable
    and compliant solutions for real-world electrical environments.


    01

    Electrical Test Equipment

    The range includes multifunction testers, insulation resistance
    testers, RCD testers, voltage indicators, test lamps, load testers,
    CAT IV clamp meters with LoZ and CAT IV multimeters with LoZ.

    It also includes contact and non-contact phase rotation meters and
    voltage-testing proving units.

    These tools help electricians diagnose faults, verify installations
    and ensure systems meet safety requirements before and after work is
    completed.


    02

    HV Test Lab

    Our current equipment configuration can test and certify insulated
    gloves to AS/NZS IEC 60903:2020 and AS 2225.

    Insulated mats can be tested to AS/NZS 61111:2020 and AS/NZS 2978.

    This helps ensure protective equipment meets Australian standards
    and performs reliably under high-voltage conditions.


    03

    Electrical Tools and Equipment

    Our range includes 1000V VDE insulated socket sets, spanner sets,
    pliers, side cutters, screwdrivers, torque wrenches, hexagon key
    T-wrenches and Torx bit sets.

    Electrical hot sticks, telescopic fuse pullers and overhead-line
    products are also available.

    These tools are designed to improve efficiency while maintaining
    safety when working on live or complex systems.


    04

    Level 2 ASP Equipment

    This equipment supports safe handling of network-level work and
    compliance with relevant industry regulations.

    The range includes harnesses, pole straps, pole-top rescue kits,
    service-line tensioners, service-line come-alongs, linesman’s scratch
    brushes, cable-core separation tools, IPC ratchet spanners and pole
    platforms.


    05

    Smart Metering Equipment

    Equipment and PPE required by smart meter installers may include
    low-voltage rescue kits, lockout kits, asbestos removal kits and NST
    Neutral Supply Testers.

    The range also includes CAT IV multimeters with LoZ functionality,
    voltage-testing proving units, phase rotation meters, test lamps,
    smart meter load testers, Type B first aid kits and FR clothing.


    06

    EV Maintenance and Safety Products

    Electric vehicle safety equipment includes specialised tools and
    protective gear designed for working on EV systems as recommended by
    the Original Equipment Manufacturer guide or listed in AS 5732:2022 –
    Electric Vehicle Operations, Maintenance and Repair.

    This includes 1000V insulated tools, danger signage, exclusion zone
    kits, arc-rated face shields, CAT IV multimeters, rescue hooks, car
    fire blankets, Class 0 insulated gloves, thermal imaging cameras and
    FR fire-resistant clothing.

    Using the right equipment helps reduce risks and ensures safe handling
    of high-voltage components.

    After-Sales Support

    Warranty & Returns

    All arc flash face shields, arc flash shields and arc-rated face shield
    products supplied by Electrical Factory Outlet are backed by a reliable
    warranty.

    For full details, refer to our Warranty & Returns Policy.

    We ensure that every face shield arc flash solution meets strict safety
    and quality standards.


    Contact our team

    Australia-Wide Delivery

    Shipping & Delivery

    We offer fast and reliable shipping across Australia for all arc flash
    helmets, visor systems and related products.

    Orders are processed efficiently, with locally stocked arc flash face
    shields helping reduce delivery times.

    Whether you need a single arc flash shield or a bulk order, we ensure
    timely delivery to support your work.


    Ask about delivery

    Helpful Information

    Frequently Asked Questions

    What are arc flash face shields used for?

    Arc flash face shields are designed to protect the face from
    extreme heat, sparks and flying debris caused by an arc flash
    incident.

    They are commonly used by electricians working on switchboards,
    control panels and high-voltage systems where there is a risk of
    sudden electrical faults.

    What is an arc flash helmet and visor?

    An arc flash helmet and visor form a complete protective system
    that covers the head and face.

    It combines a helmet with a protective visor to shield against
    thermal energy and impact. This setup is often used in high-risk
    environments where full coverage is required.

    What is the difference between an arc flash shield and a face shield?

    An arc flash shield typically refers to protective equipment
    specifically rated for arc flash incidents, whereas a standard face
    shield may not offer the same level of protection.

    An arc-rated face shield is tested to withstand the high heat and
    energy levels produced by electrical faults.

    What does an arc-rated face shield mean?

    An arc-rated face shield is certified to withstand a specific level
    of arc flash energy, measured in calories per square centimetre,
    or cal/cm².

    This rating helps electricians choose the appropriate level of
    protection based on the risks involved in their work environment.

    When should I use a face shield for arc flash protection?

    A face shield arc flash solution should be used whenever there is a
    risk of exposure to live electrical systems, including during
    maintenance, testing or installation work.

    It is especially important when working on switchboards or
    high-voltage equipment.

    Are arc flash face shields mandatory in Australia?

    In many workplaces, the use of arc flash face shields or similar
    protective equipment is required to comply with safety regulations.

    Employers must ensure workers are protected from electrical
    hazards, especially in high-risk environments.

    How do I choose the right arc flash face shield?

    Choosing the right arc flash shield depends on the risk level and
    the potential arc energy of the task if an arc flash incident
    occurs.

    In higher-energy environments, a higher-category arc face shield or
    hood may be required.

    As a general guide, without replacing a site-specific arc flash risk
    assessment:

    8–12 cal/cm², Category 2:
    Metering, ASP Level 2 work and service fuses.

    20–25 cal/cm², Category 3:
    Larger switchboards and industrial low-voltage work.

    40–52 cal/cm², Category 4:
    High-fault low-voltage boards, substations and switching work.

    Arc face shields should always be worn together with the correct
    rating of arc-rated clothing.